How to Charge Your plusOne Device With the Induction Cable

By plusOne® | Shop High-Quality & Affordable Sex Toys Online | Published: 2026-11-04

Category: How-to Guides

Follow these steps to charge your plusOne device with the induction cable, spot common mistakes, and fix charging issues fast.

Quick answer

To charge your plusOne device, plug the USB end of the induction charging cable into a power source, then align the magnetic connector with the charging contacts on your device until it snaps into place. A small indicator light should turn on to confirm charging.

Why the magnetic connection matters

The plusOne induction charging cable uses a magnetic connector that must sit flush against the device's charging contacts. If it's misaligned or blocked by debris, the device won't charge even though the cable is plugged in. Unlike plug-in ports, there's no physical insertion, so correct alignment is the most common failure point.

When to replace your charging cable

If you've confirmed the device contacts are clean and the cable is properly aligned but charging still fails, the cable itself may be damaged. A replacement plusOne induction charging cable is an inexpensive fix and ensures you always have a backup. Keep a spare in your travel bag so you're never caught with a dead device.

Step-by-step charging instructions

Inspect the cable and device contacts: Check the magnetic end of the cable and the charging contacts on your device for lint, dust, or residue. Wipe them gently with a dry cloth if needed. Never use water or liquid cleaners on the contacts—moisture can damage the electronics.
Plug the USB end into a power source: Connect the USB-A end of the cable to a wall adapter, computer, or power bank. Make sure the power source is active (e.g., the outlet is switched on). Avoid fast-charge adapters that may exceed the device's recommended input; a standard 5V USB port is safest.
Align the magnetic connector: Bring the magnetic end of the cable close to the device's charging contacts. It should snap into place automatically. If it doesn't, rotate the connector 180 degrees and try again. The connector is polarity-specific—if it repels, flip it around.
Confirm charging: Look for a small LED indicator on the device to turn on. If no light appears, re-seat the connector and check that the USB end is fully inserted. No light after two attempts usually means the cable or power source needs testing.
Let it charge fully: Allow the device to charge until the indicator light turns off or changes color (refer to your device manual). Typical charge time is 1–2 hours, but check your model's instructions. Unplug the cable once charging is complete to avoid unnecessary wear.

Product facts

plusOne® induction charging cable (1 pack): This induction charging cable is USB-compatible and compatible with the plusOne dual vibrating arc. You can charge from a laptop, power bank, or wall adapter, and it's the correct replacement for that specific device.
plusOne® induction charging cable (1 pack)